Bayer logo
Crop ScienceUnited States
search
Download Labeldownload
Tripleflex II Herbicide
CROP PROTECTION

Tripleflex II Herbicide

Herbicide
TripleFLEX® II herbicide is a premix of acetochlor, flumetsulam and clopyralid. This product contains three modes of action for control of weeds resistant to ALS, glyphosate or triazine. It provides broad-spectrum control of key grass and small- and large-seeded broadleaf weeds – without atrazine. With a flexible application window, TripleFLEX II can be applied preplant, pre-emergence and postemergence in corn up to 11 inches.
Approved In
AL, AR, CO, DE, GA, IA, IL, IN, KS, KY, LA, MD, MI, MN, MO, MS, NC, ND, NE, NJ, NM, NY, OH, OK, PA, SC, SD, TN, TX, VA, VT, WI, WV, WY
Selected image
    FormulaRegistration Number
    liquid0000524-00614-AA-0000000
    Active IngredientFormulation
    Acetochlor41.67 %
    clopyralid4.27 %
    Flumetsulam1.3 %
Labels / Safety Data Sheets (MSDS)
TRIPLEFLEX II HERBICIDE Label
TRIPLEFLEX II HERBICIDE MSDS - English
TRIPLEFLEX II HERBICIDE MSDS - Spanish

Effective Against

Our portfolio has products to fight a variety of weeds, pests and diseases.
Info
Common Waterhemp
Crabgrass Species
Fall Panicum
Lambsquarters
Palmer Amaranth
Velvetleaf
Key Pests
A
Amaranth, Palmer
B
Barnyardgrass
Beggarweed, Florida
Buckwheat, Wild
C
Carpetweed
Chickweed, Common
Clover, Red
Cocklebur, Common
Crabgrass
Crowfootgrass
Cupgrass, Prairie
Cupgrass, Southwestern
Cupgrass, Woolly
F
Foxtail, Bristly
Foxtail, Giant
Foxtail, Green
Foxtail, Robust Purple
Foxtail, Robust White
Foxtail, Yellow
G
Galinsoga
Goosegrass
H
Henbit
Horseweed
J
Jimsonweed
Johnsongrass, Seedling
K
Kochia
L
Ladysthumb
Lambsquarters, Common
M
Mallow, Venice
Marestail
Millet, Foxtail
Millet, Wild Proso
Morningglory, Ivyleaf
Morningglory, Tall
Mustard, Wild
N
Nightshade
Nutsedge, Yellow
P
Panicum, Browntop
Panicum, Fall
Panicum, Texas
Pigweed, Redroot
Pigweed, Smooth
Poinsettia, Wild
Puncturevine
Purslane, Common
Pusley, Florida
R
Ragweed, Common
Ragweed, Giant
Rice, Red
S
Sandbur, Field
Shattercane
Shepherdspurse
Sicklepod
Sida, Prickly
Signalgrass, Broadleaf
Smartweed, Pennsylvania
Sprangletop, Red
Spurge, Nodding
Spurge, Prostrate
Spurge, Spotted
Sunflower, Common
T
Thistle, Canada
V
Velvetleaf
W
Waterhemp
Witchgrass
Wormwood, Biennial

Registered Crops

Our products are available for use on a variety of different crops.
Info
checkcorn field
checksilage corn
Registered Crops
C
Corn 2, Roundup Ready
Corn, Field, Conventional Tillage
Corn, Field, Herbicide Tolerant
Corn, Field, Liberty Link
Corn, Field, No-Till
Corn, Field, Reduced Tillage
Corn, Silage, Conventional Tillage
Corn, Silage, Herbicide Tolerant
Corn, Silage, Liberty Link
Corn, Silage, No-Till
Corn, Silage, Reduced Tillage
Use and Mixin

Use and Mixing

The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information, send us an email or call 1-866-99-BAYER.
      Reentry PPE
      PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, are: coveralls, chemical resistant gloves made of barrier laminate, chemical-resistant footwear plus socks, and protective eyewear.
      PPE
      Personal Protective Equipment (PPE): Some of the materials that are chemical-resistant to this product are listed below. If you want more options, follow the instructions for category F or G on an EPA chemical-resistance category selection chart. Applicators and other handlers must wear: Long-sleeved shirt and long pants, socks, shoes, chemical-resistant gloves made of barrier laminate, and protective eyewear (goggles, face shield, or safety glasses). Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. Do not reuse them. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
      Tankmix Compatibility
      Sprayer Compatibility Always predetermine the compatibility of this product or labeled mixtures of this product with water carrier or sprayable fluid fertilizer carrier by mixing small proportional quantities in advance. See the "Standard Sprayable Fluid Fertilizer Compatibility Test" section in this label to determine the compatibility of this product and the labeled tank mixtures specified for use with sprayable fluid fertilizer carrier. Do not use liquid fertilizers as the carrier for applications of TripleFLEX II Herbicide after the crop has emerged or crop injury may occur. Mix this product or labeled tank mixture of this product with the appropriate carrier as follows: 1. Place a 20- to 35-mesh screen or wetting basket over filling port. 2. Through the screen, fill the sprayer tank one-half full with appropriate carrier. 3. If a compatibility agent is necessary to improve mixing or to prevent the formation of undesirable and unsprayable gels or precipitates, while agitating add it to the carrier already in the tank. Use only compatibility agents cleared by FDA for this use. Read and follow all directions for use, cautionary statements and all other information appearing on the selected compatibility agent label. Check for adequate agitation. 4. If a wettable powder or dry flowable formulation is used, make slurry with water, and add it slowly through the screen into the tank. Continue agitation. 5. If a flowable formation is used, add slowly through screen into the tank. Mixing and compatibility may be improved when flowable is premixed one part flowable with one part water and added slowly to the tank in diluted form. 6. Add this product slowly through the screen into the tank. Mixing and compatibility may be improved when this product is prediluted with two parts of water and added to the tank in diluted form. 7. Complete filling the sprayer tank with carrier. If a Roundup(R) agricultural herbicide or a Gramoxone brand herbicide is used, add the required amount near the end of the filling process. Remove hose from tank immediately after filling to avoid siphoning back into the water source. Maintain good agitation at all times until the contents of the tank are sprayed. NOTE: If spray mixture is allowed to settle at any time, thorough agitation is required to re-suspend the mixture before spraying is resumed. Keep by-pass line on or near bottom of tank to minimize foaming. Screen size in nozzle or line strainers should be 50-mesh. Carefully select proper nozzle to avoid spraying a fine mist. Check for even distribution of spray droplets. To reduce loss of the chemical due to drift of a fine mist, apply at nozzle pressures below 40 psi. Standard Sprayable Fluid Fertilizer Compatibility Test Herbicides may not always mix evenly throughout a sprayable fluid fertilizer or the components may separate too quickly to make their combined use of practical value. This may be due to certain characteristics of the different fluid fertilizers. A simple test using small quantities of the components is suggested to provide compatibility potential. The test follows: A. Materials Required For A Compatibility Test 1. Two one-quart jars with lid or stopper (marked "with" and "without"). 2. TEAspoons (for a more exacting test, a five to ten milliliter (mL) pipette or graduated cylinder is desirable). 3. Sprayable fluid fertilizer to be tested. 4. The herbicide chemicals to be mixed. 5. A compatibility agent (the purpose of the adjuvant is to help keep the fertilizer and crop protection chemical in suspension, if this assistance is needed). B. Procedure 1. Add one pint of the sprayable fluid fertilizer that will be used or other herbicide carrier to each jar marked "with" and "without". 2. To the jar marked "with", add 1/4 TEAspoon or 1.2 milliliters of a suitable compatibility agent; shake gently for five to ten seconds to mix. (1/4 TEAspoon in one pint is the equivalent of two pints per 100 gallons of liquid fertilizer.) 3. To each jar add the appropriate amount of herbicide(s). If more than one is used, add them separately with the wettable powders or dry flowables added first, flowables second and liquid last. Shake gently five to ten seconds after each addition. This compatibility test is designed for 25 gallons of spray per acre with the maximum labeled rate of herbicide. For changes in spray volume or herbicide rate, make appropriate changes in the ingredients of the test. Regardless of spray volume, the amount of compatibility agent should be equal to two or three pints (two pints = 1/4 TEAspoon or 1.2 milliliters, three pints = 3/8 TEAspoon or 1.8 milliliters per pint of sprayable fluid fertilizer) per 100 gallons of liquid fertilizer. C. Observations and Decisions 1. If the herbicide(s) and the sprayable fluid fertilizer are compatible. 2. If a compatibility agent is necessary. Five minutes after the final addition and mixing, observe both jars for the formation of large flakes, sludge, gels or other precipitates. Observe if the herbicide(s) cannot be physically mixed with the liquid fertilizer but remains as small oily particles in the solution. If incompatibility in any form described above occurs in the jar "with" the compatibility agent added, the liquid fertilizer and the herbicide(s) should not be used together in the same spray tank. If incompatibility as described above occurs in the jar "without" the adjuvant but not in the jar "with" adjuvant, the use of a compatibility adjuvant is recommended. Both jars should be allowed to stand and be observed periodically for one-half hour. If the separate layers of liquid fertilizer and additives can be resuspended by shaking, commercial application is possible. An emulsifiable concentrate normally will go to the top after standing; wettable powders will either settle to the bottom of the tank or jar, or float to the top, depending upon the density of the fertilizers. If the herbicide(s) is compatible with fluid fertilizer in the foregoing test without having to use a compatibility agent, fluid fertilizer may be used for the premixing. If it is not compatible without the compatibility agent, the herbicide(s) should be premixed with water before adding to the spray tank.

Recommended Agronomy Resources

ARTICLE

The Weeds on Your Farm

ARTICLE

Choosing the Right Herbicides

ARTICLE

Bayer PLUS Rewards 10% Rewards Features